Indonesia Publishes New Regulation on Technical Requirements for WLAN Devices
SDPPI of Indonesia published the Regulation #2/2019 on Technical Requirements for WLAN Devices on May 17, 2019.
This regulation applies to WLAN tools or devices that are going to be put to the market of Indonesia and contains general provisions and technical requirements.
The main technical requirements include:
1. Power supply
It is applicable for devices with AC PSU that rated voltage should be 220V ± 10% with a frequency of 50 Hz ± 2%
The external PSU (AC/DC converter) must not affect the ability of the device to meet all the relevant technical parameters
2. Non-Ionizing Radiation protection
WLAN devices should comply with the requirements of the International Commission on Non-Lonizing Radiation Protection (ICNIRP) guideline.
3. Electrical safety performance must be carried out according to IEC 60950-1 requirements
4. EMC requirements must correspond to SNI ISO / IEC CISPR 32 - 2018 requirements
5. Operational use
WLAN devices intended for outdoor use should meet the following characteristics:
WLAN devices intended for indoor use should meet the following characteristics:
The full text of the Regulation can be found here.
The information has been prepared by the GMA Consult Group team.
GMA Consult Group provides a full cycle of international type approval and global market access services for IT, Telecom and industrial electrical products in all countries throughout the world. With proven expertise in worldwide regulations, compliance, certification, and conformity assessment, GMA Consult Group can help your company speed up the access to any market with almost zero efforts from your side.
Need your own guide to the world of certification and approvals? Don't hesitate to contact us via firstname.lastname@example.org.