Requirements for UA TR mark application in Ukraine
A sign of compliance with the technical regulations (hereinafter - conformity mark UA TR) must be affixed to the product or its technical data plate in such a way that it is visible, legible and indelible. In the event that it is impossible or unwarranted because of the nature of the products, the conformity mark shall be affixed to the packaging and the accompanying documents, if such documents are provided for by the relevant technical regulations.
The conformity mark shall be applied before the introduction of the product in circulation. A match mark may be accompanied by an icon or by any other sign indicating special risk or use.
All the RF and Telecom products approved by UA National Certification Body (NCB) must be accompanied by the conformity mark with the identification number of the involved NCB in accordance with the agreement between the NCB and the Applicant (manufacturer’s local representative in Ukraine).
The marking must be made indeed in the format UA.TR.YYY where YYY is the unical number of the engaged NCB. This requirement is applicable for all the new products, which have been approved after the September 1st 2017.
Note, in accordance with the UA Technical Regulation on LVD and EMC it is not required to involve NCB for non-RF products approval procedure. The National Declaration of Conformity (UA DoC) can be accepted by the manufacturer’s local representative in Ukraine (on the basis of PoA) which should keep the technical file in the territory of Ukraine and provide it to the UA Supervising Authorities during the possible market surveillance. The conformity mark without the NCB identification number is applicable in this case.
Unified UA TR logo (with or without NCB No.) is applicable for all the UA Technical Regulations.
Information has been prepared by the GMA Consult Group team.